제품 문의

다양한 실무 경험을 가진 컨설턴트가 귀사의 산업의 특정 공정에 필요한 진공 솔루션을 상담해 드립니다.

제품 문의

Requirements for Vacuum Technology

High shear force on glass
Throughout the entire process chain, glass is handled dynamically with a wide variety of requirements. During loading of the line, the glass is often coated with separation powder. The suction plates SGF have a special structure on the suction area to absorb powerful shear forces even when working with suction plates coated with separation powder. In processes that require not only shear force, but also high flexibility and adaptability, the suction cups SAB with 1.5 folds are the optimum solution.

Non-marking handling of glass
Once the glass sheets have been cleaned, marks absolutely must be avoided. With HT1, Schmalz has developed a material that allows glass to be handled leaving no visible marks, even at temperatures of up to 170°C. In addition to the HT1 material, suction cup covers can also be used to completely avoid any contact between the suction cup and the surface of the glass.

Short cycle times and high system availability
Handling processes demand short cycle times. The SCPi/SMPi compact ejectors feature an integrated suction and blow-off function. This minimizes suction and depositing times, as well as energy consumption, since the integrated automatic air-saving function means that the ejector is only activated when vacuum is needed. The intelligent compact ejectors also feature numerous functions for energy and process control.

Ergonomic handling – automated or manual
Throughout the process chain, glass and modules are handled automatically or manually. The modular suction spiderSSP offer a turnkey solution for automated handling, from destacking the glass plates to flashing and commissioning the modules. In addition to automated solutions, manually operated tube lifters Jumbo can also be used. The tube lifter only uses vacuum to lift and lower the modules. This ensures minimal transport times and ergonomic handling.

[Translate to Korean:] Key Products for the Thin-Film Modules Sector

Suction Plates SGF
.COM

Suction Plates SGF

  • Diameter: 125 to 400 mm
  • Material: EPDM, HT1
Bellows Suction Cups SAB HT1 (1.5 Folds)
.COM

Bellows Suction Cups SAB HT1 (1.5 Folds)

  • Diameter: 22 to 125 mm
  • Material: HT1
  • Connection nipple vulcanized to elastomer part
Compact Ejectors X-Pump SXPi / SXMPi with IO-Link
.COM

Compact Ejectors X-Pump SXPi / SXMPi with IO-Link

  • Suction capacity up to 220 l/min
  • Max. vacuum: 85 %
  • Body made of plastic
Compact Ejectors SCPi / SMPi
.COM

Compact Ejectors SCPi / SMPi

  • Suction capacity up to 185 l/min
  • Max. vacuum: 85 %

진공 석션 스파이더 SSP

  • 맞춤형으로 제작된 엔드 오브 암 end-of-arm 툴링(로봇팔에 부착)

 

Tube Lifter Jumbo

Ergonomically tube lifter

  • Lift capacity up to 300 kg
  • Pneumatic swiveling unit